Tungsten Carbide Balls

 

Tungsten Carbide balls are manufactured in two standard material grades of C-1 and C-2.   C-1, with better shock resistance than C-2, this grade is typically used as a mining grade where toughness and abrasion resistance are also important.  It has also proven useful in bearing applications. C-2 affords higher wear resistance and toughness which make this grade an excellent general purpose grade for use in pumps and valves.

Tungsten Carbide Balls:  Available Grades and Sizes   Click here for sizes and pricing Grade Size Range in Inches and Millimeters 5 3/32 - 1/2                           2.381 - 12.700 10 3/32 - 1                               2.381 - 25.400 16 3/32 - 1                               2.381 - 25.400 24 3/32 - 1 1/2                         2.381 - 38.100 48 3/32 - 1 1/2                         2.381 - 38.100 100 3/32 - 2 1/2                         2.381 - 63.500 200 3/32 - 2 1/2                         2.381 - 63.500

Balls per Pound Size Balls per Pound Inches Millimeters 3/32 2.381 4,290 1/8 3.175 1,810 5/32 3.968 927 3/16 4.762 537 7/32 5.556 338 1/4 6.350 226 9/32 7.143 159 5/16 7.937 116 11/32 8.731 87.1 3/8 9.525 67.1 7/16 11.112 42.2 1/2 12.700 28.3 9/16 14.287 19.9 5/8 15.875 14.5 3/4 19.050 8.38 7/8 22.225 5.28 1 25.400 3.54 1 1/8 28.575 2.48 1 1/4 31.750 1.81 1 3/8 34.925 1.36 1 1/2 38.100 1.05 1 3/4 44.450 .660 2 50.800 .442 2 1/4 57.150 .311 2 1/2 63.500 .226

Material Analysis Property/Material Tungsten Carbide Grade C-1 Tungsten Carbide Grade C-2 Chemistry (wt%)................................................ 94% Wc - 6% Co 94% Wc - 6% Co Hardness............................................................ 91.5 Ra 92.0 Ra Density (gm/cc)................................................. 14.95 14.95 Transverse Rupture Strength (psi)................. 400,000 420,000 Ultimate Compressive Strength (psi).............. 750,000 790,000 Ultimate Tensile Strength (psi)........................ 220,000 210,000 Modulus of Elasticity (psi)................................ 93 x 106 94 x 106 Proportional Limit (psi)..................................... 210,000 280,000 Ductility (% Elongation).................................... 0.2% 0.2% Impact Strength................................................. 12 in-lb 12 in-lb Abrasion Resistance........................................ 16 36

© Copyright 2005 Hoover Precision Products, Inc., All Rights Reserved